ACCESSORIES

The tailboard can be used either fixed in place or as a swing tailboard depending on the positioning of the tailboard pins. The holes for changing the set-up are already present on all three-point buckets.

The ability to swivel as an end wall extension is particularly practical. When picking up large-volume loads (compost, wood chips) and when clearing snow, it prevents overflow onto the tractor's hydraulics.

To extend the load surface, the tailboard is simply turned around and fastened in place with the same pins without any need for tools. This provides a noteworthy 40 cm extension, useful for example for transporting motor mowers or small vehicles.

This Cat II mounting enables you to couple and uncouple in seconds, comfortably from the driver's seat. The Weiste quick-coupler can be mounted quickly and easily thanks to the plug-in system. It should be noted that in principle, a Weiste quick-coupler is only suitable for light work and not for heavy transport or levelling work.

The loading volume of your three-point bucket can be increased by 60cm, e.g. for transporting wood, by mounting the uprights at the front and sides. In addition, the uprights also serve as a base frame for individual special bodies (mounting of shuttering panels or construction steel mesh as lightweight attachments). The uprights are bolted to the side wall and drilled holes are provided for this as standard. The function of the tailboard swivel device is retained.

6 attachment points are provided as standard on the shaped side tubes, for lashing straps to secure the load.

If you require additional lashing eyes, we can provide you with a sketch of the three-point bucket on which you can draw the mounting points individually (also inside). The eyes are then positioned by us and simply bolted on.

We offer practical coupling handles with markings for the pressure and return lines for convenient and tidy connection of the hydraulic hoselines.

The practical bolt-on tool holder enables secure carrying of various shafted tools. So, brooms, shovels or similar are always close at hand and have their own storage spot on the multifunctional three-point bucket.

There are no limits to your imagination here! The three-point bucket is perfectly matched in colour to your tractor or to the area of application. (municipal, fire brigade, company vehicle fleet, forklift trucks and much more)

Powder coating is possible in all standard RAL colours.

This indispensable equipment package turns a nippy tractor into a versatile municipal vehicle!

This includes:

  • Tailboard swivel device + load surface extension
  • Special painting of the bucket in RAL 2009 traffic orange
  • Tool holder for 3 tools, bolted to the front wall of the bucket
    • For mounting left and right / inside and outside of the front wall
    • With 3 tool mounting holes up to 90mmx60mm
    • 3 rubber fixing clamps for holding in place
  • Left and right LED marker lights, bolted onto the bucket front wall
    • Slides to working position or transport position without tools
    • Plug holder for cable fitted to three-point hitch
    • Tube for cable routing welded onto three-point hitch
  • Coupling handles with marking on the hydraulic hoselines

Professional package for Samurai in commercial use

  • Side cutting edge wear protection
  • Three-point wear protection
  • HB500 scraper strip
  • Additional reinforcement and stiffening

Transparent protective film as protection from stone chips in the vicinity of the vehicle tyres. This is glued a large area of the front wall.

We recommend wear protection for the vertical cutting edge if it will frequently be used for clearing (scraping) along kerbs. It is made from sturdy Hardox HB 400 and is simply welded on to the side.

LED rear lights on the tailboard for safe road transport.

Of course, the rear lights are approved for road use.

Scraper strips of a great variety of materials and strengths can be mounted on your three-point bucket. Including:

  • HB 500 scraper strip - 10 mm thick, ca. 50% more wear resistant than HB 400
  • HB 540 scraper strip - 20 mm thick, ca. 50% more wear resistant than HB 500
  • Plastic scraper strip – 22 mm thick, 90 mm deep
    (Note: The plastic scraper strip is intended only for smooth, coated floors in the foodstuffs or feed industries. Not suitable for other digging or excavation work)

Other materials available on request!

More volume with the practical bulk materials attachment. High volumes with low weights can be loaded and transported much more economically with this accessory.

  • 200 bulk materials attachment for Samurai (2.4 m3) | Article no. 56210
  • 220 bulk materials attachment for Samurai (2.6 m3) | Article no. 56220
  • 250 bulk materials attachment for Samurai (3 m3) | Article no. 56251
  • XL 200 bulk materials attachment (3 m3) | Article no. 57200
  • XL 220 bulk materials attachment (3.3 m3) | Article no. 57220
  • XL 250 bulk materials attachment (3.8 m3) | Article no. 57250

The agricultural rail mount/hook serves only for simple conversion of the three-point hitch. For digging or transport tasks, the bottom links should be directly coupled (without agricultural rail mount). It is not possible to combine the agricultural rail mount with Euro standard or Weiste quick-couplers.

Many commercial and agricultural businesses also use forklift trucks. For this application, the three-point hitch was additionally equipped with pockets for forklift tines. The three-point bucket is simply picked up and secured with these.

The required oil circuit is usually connected to the side shift of the forklift truck. This ensures that all lifting and tipping functions are maintained without restrictions. Furthermore, in the version of three-point bucket with forklift mounting, all other attachment options for the tractor are available.

With this mounting you can significantly extend the range of applications of your three-point bucket. You can achieve up to 2.4m more tipping height on the front loader than with normal front loader light goods buckets. With appropriate protection, you also have a first-class work platform.

If used almost exclusively on a single carrier vehicle or lifting device, we also offer direct mounting. The classic three-point linkage is replaced by the respective mounting frame, which however still allows a three-point attachment. This saves you an adapter and the three-point bucket sits even closer to the equipment.

With this mounting you can significantly extend the range of applications of your three-point bucket. You can achieve up to 2.4m more tipping height on the front loader than with normal front loader light goods buckets. With appropriate protection, you also have a first-class work platform.

With this mounting you can significantly extend the range of applications of your three-point bucket. Depending on the type, you can achieve up to 2.4m more tipping height on the farmyard loader than with normal front loader light goods buckets. Your farmyard loader thus also becomes a high loader.

A complete overview of adapters can be found under Adapters