TAILBOARD SWIVEL DEVICE / LOAD SURFACE EXTENSION
The tailboard can be used either fixed in place or as a swing tailboard depending on the positioning of the tailboard pins. The holes for changing the set-up are already present on all three-point buckets.
The ability to swivel as an end wall extension is particularly practical. When picking up large-volume loads (compost, wood chips) and when clearing snow, it prevents overflow onto the tractor's hydraulics.
To extend the load surface, the tailboard is simply turned around and fastened in place with the same pins without any need for tools. This provides a noteworthy 40 cm extension, useful for example for transporting motor mowers or small vehicles.
MUNICIPAL WEISTE QUICK-COUPLER
This Weiste municipal quick-coupler enables you to couple and uncouple in seconds, comfortably from the driver's seat. The Weiste quick-coupler can be mounted quickly and easily thanks to the plug-in system. It should be noted that in principle, a Weiste quick-coupler is only suitable for light work and not for heavy transport or levelling work.
Before ordering, please contact us to check whether the Weiste quick-coupler is suitable for your municipal vehicle.
WEISTE QUICK-COUPLING HITCH
This Cat I and II mounting enables you to couple and uncouple in seconds, comfortably from the driver's seat. The Weiste quick-coupler can be mounted quickly and easily thanks to the plug-in system. It should be noted that in principle, a Weiste quick-coupler is only suitable for light work and not for heavy transport or levelling work.
The loading volume of your three-point bucket can be increased by 60 cm, e.g. for transporting wood, by mounting the uprights at the front and sides. In addition, the uprights also serve as a base frame for individual special bodies (mounting of shuttering panels or construction steel mesh as lightweight attachments). The uprights are bolted to the side wall and drilled holes are provided for this as standard. The function of the tailboard swivel device is retained.
6 attachment points are provided as standard on the shaped side tubes, for lashing straps to secure the load.
If you require additional lashing eyes, we can provide you with a sketch of the three-point bucket on which you can draw the mounting points individually (also inside). The eyes are then positioned by us and simply bolted on.
HYDRAULIC COUPLING HANDLES
We offer practical coupling handles with markings for the pressure and return lines for convenient and tidy connection of the hydraulic hoselines.
The practical bolt-on tool holder enables secure carrying of various shafted tools. So, brooms, shovels or similar are always close at hand and have their own storage spot on the multifunctional three-point bucket.
There are no limits to your imagination here! The three-point bucket is perfectly matched in colour to your tractor or to the area of application. (municipal, fire brigade, company vehicle fleet, forklift trucks and much more)
Powder coating is possible in all standard RAL colours.
THREE-POINT HITCH CAT. 0
The three-point bucket, Cat 0 & Cat municipal guarantees proper fastening of the three-point bucket on garden machinery and small tractors too. The standard three-point bucket Cat I d22 is retained without restriction.